IntelliPower 2 - Intelligent Uninterruptible Power Solution System

IntelliPower 2 (12V - 1000VA - 600Watt)


Tired of missing your favorite TV program, losing that important document on your PC or having no Lights when your mains power supply is interrupted unexpectedly. The solution to these and many other problems caused by the loss or unreliability of your mains power supply is provided by the IntelliPower range of Intelligent Uninterruptible Power Supply Systems.

The UPS seamlessly transfers to battery power when mains power is lost or is unreliable and then seamlessly back to the mains power supply when it is restored. The IntellPower 2 UPS uses a low cost standard high amperage 12 Volt battery which can be sourced easily and anywhere.

The UPS has a built-in charger which starts charging your battery as soon as your mains power supply is restored and allows the battery to be charged while you are using your connected devices on mains power, with no performance loss.

The UPS has visible LED indicators and audible buzzer alarms to notify you clearly and easily what the latest status is of your mains and battery supplies. The IntelliPower 2 is provided with a simple easy to use manual, is user installable and comes supplied with the required battery connection cables.

Features

IntelliPower 2 Standby UPS Specifications

CAPACITY VA/W 1000VA/600W
ACINPUT Nominal Voltage 1 Nominal Frequency 220/230/240VAC 150Hz or 60Hz (Auto Detection)
Voltage Range Selector - Narrow 1 Wide 170-280VAC 1 90-280VAC
OUTPUT Voltage 1 Output Wave Form 230VAC +101-18% 1 Modified Sine Wave
  Frequency 1 Efficiency AC to AC - DC to AC 50Hz/60Hz +1- 0.5Hz 1 >95% - >80%
BATTERY 1 CHARGER Nominal Voltage 1 Charging Voltage 1 Charging Current 14V DC 1 13.7V +1- O.2V 1 10Amp maximum
Overcharge Protection 16V +1- 0.4V Charger stops and Fault Alarm Sounds
TRANSFER TIME Typical AC to DC or DC to AC Typical 15-20ms - 40ms maximum
INDICATORS AC (Mains) with DC (Battery) Charging Mode Green LED Flashing every 2 Seconds
  Overload - Fault Red LED Flashing every 0.5 Second 1 Red LED Lit
AUDIBLE ALARM Low Battery Voltage in Battery Mode Alarm sound beeps every 2 Seconds
Overload 1 Fault Alarm sound beeps every 0.5 Seconds 1 Alarm Sound Continuously
PROTECTION FEATURES Built-in Protection Features

Deep Discharge, Overcharge, Short Circuit, Overload, Battery Short, Over Voltage, Under Voltage
PHYSICAL Dimension (D x W x H) mm 1 Net Weight (Kgs) 249mm x 242mm x 80mm 1 2.5Kg
ENVIRONMENT Operating Environment 1 Noise Level 0-40C Temperature 0-90% Relative Humidity (Non-Condensing) 1 Less than 45dB

Application Examples

IntelliPower 2 IntelliPower 4 Device Supported
6 to 8 hours 8 to 10 hours 2 x 60 Watt lights plus
1 x PC System + 1 x Printer
6 to 8 hours 8 to 10 hours 170-280VAC 1 90-280VAC
6 to 8 hours 8 to 10 hours 2 x 60 Watt lights plus
1 x 32" LCD Monitor or 40" Plasma Screen plus
1 x DVD plus
1 x Home theatre system + 1 x Satellite Dish plus
1 x PVR or DSTV Decoder
4 to 6 hours 6 to 8 hours 5 x 60 Watt lights
6 to 8 hours 8 to 10 hours 2 x 60 Watt lights plus
1 x 54 or 74cm TV
4 to 6 hours 6 to 8 hours 2 x 60 Watt lights plus
1 x bar fridge/freezer
  4 to 6 hours

2 x 60 Watt lights plus
1 x 32" LCD Monitor or 40" Plasma Screen plus
1 x DVD player plus
1 x Home theatre system plus
1 x Satellite Dish plus
1 x PVR or DSTV Decoder plus
1 x bar fridge/freezer plus

  4 to 6 hours 1 x 60 Watt light plus
1 x 54 or 74cm TV plus
1 x DVD player plus
1 x Home theatre system plus
1 x PVR or DSTV Decoder plus
1 x Cellphone charger plus
1 x Microwave oven (1000 Watts or lower input) can be used, nothing larger.
Important: These appliances cannot run on these units Toasters, Irons, Stoves, Kettles, Hairdryers, Heaters, Geysers.